Garmin G900X Pilot's Manual - page 320
GPS NAVIGATION
190-00726-00 Rev. A
5-162
Garmin G900X Pilot’s Guide
Selecting a departure for the departure airport:
1)
Display the Procedures Window by pressing the
PROC
Key.
2)
Highlight ‘SELECT DEPARTURE’.
3)
Press the
ENT
Key.
4)
Enter an identifier, city, or facility name.
5)
Press the
ENT
Key until the departure field is highlighted.
6)
Select the desired departure.
7)
Press the
ENT
Key. A window appears listing the available transitions for the departure.
8)
Select the desired transition or vectors.
9)
Press the
ENT
Key. A window appears listing the available runways for the departure.
10)
Select the desired runway.
11)
With ‘LOAD?’ highlighted, press the
ENT
Key to load the departure.
SELECT ARRIVAL
‘SELECT ARRIVAL’ selects a published standard terminal arrival route (STAR) for the destination airport or
replaces a current arrival with a new selection.
Figure 5-155 Selecting an Arrival
Available
Arrivals
Available
Transitions
Selecting an arrival for a direct-to or flight plan destination airport:
1)
Display the Procedures Window by pressing the
PROC
Key.
2)
Highlight ‘SELECT ARRIVAL’.
3)
Press the
ENT
Key.
4)
Enter an identifier, city, or facility name.
5)
Press the
ENT
Key until the arrival field is highlighted.
6)
Select the desired arrival.