Garmin G900X Pilot's Manual - page 175
GPS NAVIGATION
190-00726-00 Rev. A
5-17
Garmin G900X Pilot’s Guide
Enabling/disabling topo data and select a topo data range:
1)
Press the
MENU
Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2)
Press the
ENT
Key. The Map Setup Menu is displayed.
3)
Select the ‘Map’ group.
4)
Press the
ENT
Key.
3)
Highlight the ‘TOPO DATA’ field.
4)
Select ‘On’ or ‘Off’.
5)
Highlight the range field. TOPO ranges are from Off to 2000 nm.
6)
To change the TOPO range setting, turn the small
FMS
Knob to display the range list.
7)
Select the desired range.
8)
Press the
ENT
Key.
Topo Scale
The topo scale setting enables or disables the topography range box located in the lower right corner
of the Navigation Map.
Enabling/disabling the topo range box:
1)
Press the
MENU
Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2)
Press the
ENT
Key. The Map Setup Menu is displayed.
3)
Select the ‘Map’ group and press the
ENT
Key.
4)
Highlight the ‘TOPO Range’ field.
5)
Select ‘On’ or ‘Off’.
6)
Press the
FMS
Knob to return to the Navigation Map Page.
Terrain Proximity Data
Terrain Proximity data can be enabled or disabled on the Navigation Map Page using the ‘TERRAIN
DATA’ setting. A data range can also be selected. The data range is the maximum map range that Terrain
Proximity data is displayed.
Enabling/disabling Terrain Proximity data and to select a Terrain Proximity data range:
1)
With the Navigation Map Page displayed, press the
MENU
Key to display the Navigation Map Page Menu. The
cursor flashes on the ‘Map Setup’ option.
2)
Press the
ENT
Key. The Map Setup Menu is displayed.
3)
Select the ‘Map’ group.
4)
Press the
ENT
Key.
5)
Highlight the ‘Terrain Proximity DATA’ field.
6)
Select ‘On’ or ‘Off’.