Garmin G900X Pilot's Manual - page 381
190-00726-00 Rev. A
Garmin G900X Pilot’s Guide
6-55
HAZARD AVOIDANCE
TAS ALERTS
NOTE:
Refer to the TAS600 documentation for information on alerts generated by the TAS equipment.
When the number of TAs on the Traffic Map Page increases from one scan to the next, the following occur:
• A ‘TRAFFIC’ Annunciation appears to the top left of the Attitude Indicator on the PFD, flashing for 5 seconds
and remaining displayed until no TAs are detected in the area.
• The PFD Inset Map is automatically displayed with traffic.
Figure 6-70 Traffic Annunciation (PFD)
Inset Map
Displays When
TA is Detected
Aural traffic alerts generated by the TAS600-series, even those in progress, can be suspended manually. If
muting is turned off, the system annunciates all traffic voice alerts which were issued while the system was
muted.
Muting/generating TAS voice alerts:
1)
Select the Traffic Map Page.
2)
Select the
MUTE
Softkey.
OR
:
a)
Press the
MENU
Key.
b)
Select ‘Mute On’ (shown if muting is currently off) and press the
ENT
Key.
3)
Select the
MUTE
Softkey again to turn traffic voice alerting on and annunciate all muted traffic voice alerts
issued during system muting.
OR
:
a)
Press the
MENU
Key.
b)
Select ‘Mute Off (shown if muting is currently on) and press the
ENT
Key.