Garmin G900X Pilot's Manual - page 204

GPS NAVIGATION

190-00726-00  Rev. A

5-46

Garmin G900X Pilot’s Guide

5.6  DIRECT-TO-NAVIGATION (PFD) 

  NOTE: 

Section 5.3 describes the PFD Inset Map and PFD Windows.  It is recommended that the user read this 

section before beginning GPS navigation operations on the PFD.

5

6

8

7

2

4

3

9

1

Figure 5-40  PFD Direct-to Window

1

Identifier

2

Facility Name

3

VNV Altitude Constraint

4

Bearing From Waypoint

5

Course to Selected 

Waypoint

6

City and State

7

Along Track Offset

8

Distance to Waypoint

9

Waypoint Symbol

OPERATIONS

A direct-to waypoint can be selected in the following ways:

• By identifier, waypoint location or facility name

• From a list of waypoints in the active flight plan

• From a list of 25 nearest airports

The PFD Direct-to window is enabled and disabled by pressing the 

Direct-to

 Key

(

)

.  The currently 

selected waypoint displays the information shown in Figure 5-40.

Direct-to Navigation from the PFD:

1) 

Select the 

Direct-to

 Key 

(

)

.

2) 

Turn the large

FMS

 Knob to place the cursor in the desired selection field.