Garmin G900X Pilot's Manual - page 65

190-00726-00  Rev. A

Garmin G900X Pilot’s Guide

2-5

FLIGHT INSTRUMENTS

Vspeeds can be changed and their flags turned on/off from the Timer/References Window (Figure 2-5).  

When active (on), the Vspeeds are displayed at their respective locations to the right of the airspeed scale.  By 

default, all Vspeed values are reset and all flags turned off when power is cycled.

Changing Vspeeds and turning flags on/off:

1) 

Select the 

TMR/REF

 Softkey.

2) 

Turn the large

 FMS

 Knob to highlight the desired Vspeed.

3) 

Use the small 

FMS

 Knob to change the Vspeed in 1-kt increments (when a speed has been changed from a 

default value, an asterisk appears next to the speed).

4) 

Press the 

ENT

 Key or turn the large 

FMS

 Knob to highlight the ON/OFF field

5) 

Turn the small

 FMS 

Knob clockwise to ON or counterclockwise to OFF.

6) 

To remove the window, press the 

CLR

 Key or the 

TMR/REF

 Softkey.

Figure 2-5  Timer/References Window

Figure 2-6  Timer/References Menu

Turning all Vspeed flags ON/OFF:

1) 

Select the 

TMR/REF

 Softkey.

2) 

Press the 

MENU

 Key.

3) 

To view all Vspeed flags, highlight ‘All References On’ and press the 

ENT

 Key (Figure 2-6).

4) 

To remove all Vspeed flags, turn the 

FMS

 Knob to highlight ‘All References Off’ and press the 

ENT

 Key.

Restoring all Vspeed defaults:

1) 

Select the 

TMR/REF

 Softkey.

2) 

Press the 

MENU

 Key.

3) 

Turn the 

FMS

 Knob to highlight ‘Restore Defaults’.

4) 

Press the 

ENT

 Key.