Garmin G900X Pilot's Manual - page 189
GPS NAVIGATION
190-00726-00 Rev. A
5-31
Garmin G900X Pilot’s Guide
The Navigation Map displays various shades of topography land colors representing the rise and fall of land
elevation similar to aviation sectional charts (Figure 5-19). The Navigation Map can display a topographic
range representing various key points of Terrain Proximity elevation colors with their associated elevation
value labeled.
Enabling/disabling topo data and selecting a topo data range:
1)
Press the
MENU
Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2)
Press the
ENT
Key. The Map Setup Menu is displayed.
3)
Select the ‘Map’ group.
4)
Press the
ENT
Key.
3)
Highlight the ‘TOPO DATA’ field.
4)
Select ‘On’ or ‘Off’.
5)
Highlight the range field. TOPO ranges are from Off to 2000 nm.
6)
To change the TOPO range setting, turn the small
FMS
Knob to display the range list.
7)
Select the desired range.
8)
Press the
ENT
Key.
Displaying topographic data on all pages displaying maps:
1)
Select the
MAP
Softkey.
2)
Select the
TOPO
Softkey.
3)
Select the
TOPO
Softkey again to remove topo data from the Navigation Map. When topographic data is
removed from the page, all navigation data is presented on a black background.
TOPO SCALE
The ‘TOPO SCALE’ menu option enables or disables the topography range box located in the lower
right corner of the Navigation Map.
Enabling/disabling the topo range box:
1)
Press the
MENU
Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.
2)
Press the
ENT
Key. The Map Setup Menu is displayed.
3)
Select the ‘Map’ group and select the
ENT
Key.
4)
Highlight the ‘TOPO SCALE’ field.
5)
Select ‘On’ or ‘Off’.
6)
Press the
FMS
Knob to return to the Navigation Map Page.