Garmin G900X Pilot's Manual - page 413

190-00726-00  Rev A

Garmin G900X Pilot’s Guide

8-27

ADDITIONAL FEATURES

NOTE

:  

A subdued softkey label indicates the function is disabled.

The ChartView time critical information can also be found on the AUX - System Status page.  The database 

‘CYCLE’ number, ‘EXPIRES’, and ‘DISABLES’ dates of the ChartView subscription appear in either blue or yellow 

text.  When the ChartView ‘EXPIRES’ date is reached, ChartView becomes inoperative 70 days later.  This is shown 

as the ‘DISABLES’ date.  When the ‘DISABLES’ date is reached, charts are no longer available for viewing.  The 

SHW CHRT

 Softkey label then appears subdued and is disabled until a revised issue of ChartView is installed.

Select the 

DBASE

 Softkey for scrolling through the database information.  Scroll through the database with 

the 

FMS

 knob or 

ENT

 Key.

The ChartView database cycle number shown in Figure 8-33, ‘0619’ is broken down as follows:

06 – Indicates the year 2006

19 – Indicates the 19th issue of the ChartView database for the year

The ‘EXPIRES’ date “05–OCT–06” is the date that this database should be replaced with the next issue.

The ‘DISABLES’ date “14–DEC–06” is the date that this database becomes inoperative.

Figure 8-33  AUX – System Status Page, ChartView Current and Available

ChartView 

Data

DBASE

 Softkey 

Selected

The  ChartView  database  is  provided  directly  from  Jeppesen.    Refer  to  Updating  Jeppesen  Databases  in 

Appendix B for instructions on revising the ChartView database.