Garmin G900X Pilot's Manual - page 211

GPS NAVIGATION

190-00726-00 Rev. A

5-53

Garmin G900X Pilot’s Guide

Figure 5-47  Viewing a Restriction

Loading a pilot control lighting frequency into selected COM standby frequency:

1) 

With the Airport Information Page displayed, press the 

FMS

 Knob to activate the cursor.

2) 

Move the cursor to the ‘PCL FREQ’ field in the Runways Window.

3) 

Press the 

ENT

 Key to place the PCL frequency in the standby field of the COM window.

4) 

Press the 

FMS 

Knob to remove the cursor.

The  airport  runway  information  field  displays  runway  designations,  length,  surface  type  and  lighting  for 

the selected airport.  A map image of the runway layout and surrounding area is also displayed on the Airport 

Information  Page.    The  map  image  range  is  displayed  in  the  lower  left  corner  and  is  adjustable  using  the 

joystick.  For airports with multiple runways, information for each runway is available.