Garmin G900X Pilot's Manual - page 260

GPS NAVIGATION

190-00726-00  Rev. A

5-102

Garmin G900X Pilot’s Guide

Operations using the cursor:

1) 

On the MFD, bringing the cursor over the airway heading centers the map on the airway segment.

2) 

Pressing the 

CLR

 Key displays a prompt asking “Remove aaaaa.wwwww from Flight Plan OK or CANCEL”.  If 

OK is pressed, the airway segment is removed (but not the entry waypoint).  If the exit waypoint is the entry 

waypoint of a subsequent airway or if it overlaps an arrival or an approach, the exit waypoint is not removed.

3) 

‘Load Airway’ can be selected with the cursor over the airway heading.  That brings back the Airway Loading 

Page which is initialized to the airway segment that is currently in the flight plan.

4) 

A new waypoint can be entered with the cursor over the airway header.  The new waypoint is inserted ahead of 

the airway header (after the airway entry waypoint).

COLLAPSE AIRWAYS FEATURE

‘Collapse Airways’ is selectable from the Flight Plan Menu if the flight plan contains at least one airway and 

the current state is “expanded” (Figure 5-85).  In similar fashion, “Expand Airways” is selectable if the flight 

plan contains airways and the current state is “collapsed”.  When airways have been collapsed, it is indicated 

on the airway heading.

Figure 5-85  Collapse Airway Feature

ACTIVE LEG DISPLAY WITH COLLAPSED AIRWAY ACTIVE

The Flight Plan Page always keeps the following three waypoints visible:

• From Waypoint

• To Waypoint

• Next Waypoint  (shows the next course)

To prevent one or more of these waypoints from being hidden in a collapsed airway segment, the airway 

segment that contains either the “To” or the “Next” waypoint is automatically expanded.