Garmin G900X Pilot's Manual - page 353

190-00726-00  Rev. A

Garmin G900X Pilot’s Guide

6-27

HAZARD AVOIDANCE

obstacle data are decluttered from the display.  If a map range larger than the map range setting is selected, the 

data is removed from the map.

Terrain data can be selected for display independently of obstacle data; however, obstacles recognized by 

Terrain Proximity as yellow or red are shown when terrain is selected for display and the map range is within 

the setting limit.

Maps besides the Terrain Proximity Page use settings based on those selected for the Navigation Map Page.  

The  maximum  display  ranges  for  obstacles  on  each  map  are  dependent  on  the  range  setting  made  for  the 

Navigation Map.  If the maximum range for obstacle display on the Navigation Map is adjusted to below 20 nm, 

the highest obstacle display range settings on the other applicable maps are also adjusted proportionally.

Customizing terrain and obstacle display on the Navigation Map Page:

1) 

Select the Navigation Map Page.

2) 

Press the 

MENU

 Key.

3) 

With ‘Map Setup’ highlighted, press the 

ENT

 Key (Figure 6-38).

4) 

Turn the small 

FMS

 Knob to select the ‘Map’ Group and press the 

ENT

 Key (Figure 6-39).

5) 

Turn the large 

FMS

 Knob or press the 

ENT

 Key to scroll though product selections (Figure 6-40).

•  

TERRAIN DATA – Turns the display of terrain data on or off and sets maximum range at which terrain is shown

•  

OBSTACLE DATA – Turns the display of obstacle data on or off and sets maximum range at which obstacles are shown

6) 

Turn the small 

FMS

 Knob to scroll though options for each product (ON/OFF, range settings).

7) 

Press the 

ENT

 Key to select an option.

8) 

Press the 

FMS

 Knob or 

CLR

 Key to return to the Navigation Map Page with the changed settings.

Figure 6-39  Navigation Map Page Setup Menu

Figure 6-38  Navigation Map Page Menu

Figure 6-40  Navigation Map Page Setup Menu, Map Group