Garmin G900X Pilot's Manual - page 132
190-00726-00 Rev. A
Garmin G900X Pilot’s Guide
4-10
AUDIO PANEL AND CNS
AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the
ENT
Key (Figures 4-9, 4-10, and 4-11).
Auto-tuning a COM frequency from the WPT and NRST Pages:
1)
From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the
FMS
Knob or the
appropriate softkey.
2)
Turn the
FMS
Knob to place the cursor on the desired COM frequency (Figure 4-11).
3)
Press the
ENT
Key to load the COM frequency into the standby field of the selected COM radio.
4)
Press the
Frequency Transfer
Key to transfer the frequency to the COM Active Frequency Field.
Figure 4-9 Frequency Auto-Tuning from the MFD
Turn the
FMS
Knob to Scroll
Through a List
of Frequencies
Press the
ENT
Key to
Load a Highlighted
Frequency into
the COM Standby
Frequency Box
OR
:
5)
Press the
MENU
Key to display the page menu (Figure 4-10).
6)
Turn the large
FMS
Knob to scroll through the OPTIONS Menu.
7)
Press the
ENT
Key to place the cursor on the desired selection.
8)
Scroll through the frequency selections with the
FMS
Knob or the
ENT
Key.
9)
Press the
ENT
Key to load the COM frequency into the standby field of the selected COM radio.
10)
Press the
Frequency Transfer
Key to transfer the frequency to the COM Active Frequency Field.
Figure 4-10 Nearest Pages Menus
Nearest Airspaces Menu
Nearest Airports Menu
Nearest Frequencies Menu