Garmin G900X Pilot's Manual - page 35
190-00726-00 Rev. A
Garmin G900X Pilot’s Guide
1-23
SYSTEM OVERVIEW
• INSET
Displays Inset Map in PFD lower left corner
OFF
Removes Inset Map
DCLTR (3)
Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Removes land data
DCLTR-2: Removes land and SUA data
DCLTR-3: Removes everything except active flight plan
TRAFFIC
Displays/removes traffic information on Inset Map
TOPO
Displays/removes topographical data (e.g., coastlines, terrain, rivers, lakes) on Inset Map
TERRAIN
Displays/removes terrain information on Inset Map
NEXRAD
Displays/removes NEXRAD weather and coverage information on Inset Map (
optional
)
XM LTNG
Displays/removes XM lightning information on Inset Map (
optional
)
Figure 1-18 INSET Softkeys
INSET
XPDR
IDENT
TMR/REF
NRST
ALERTS
OBS
PFD
CDI
Press the
CDI
Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
Select the
BACK
Softkey to
return to the top-level softkeys.
Select the
IDENT
or
BACK
Softkey to return to the top-
level softkeys.
XPDR
STBY
ON
ALT
VFR
IDENT
BACK
ALERTS
CODE
IDENT
BACK
ALERTS
0
1
2
3
4
5
6
7
BKSP
BACK
Press the
OFF
or
BACK
Softkey
to return to the top-level softkeys.
DCLTR
DCLTR-2
DCLTR-3
DCLTR-1
TOPO
ALERTS
NEXRAD
(optional)
TERRAIN
XM LTNG
(optional)
OFF
TRAFFIC
INSET
STD BARO
BACK
ALERTS
WIND
HSI FMT
PFD
BRG1
BRG2
Select the
STD BARO
or
BACK
Softkey to return to the top-level
softkeys.
ALT UNIT
DFLTS
Select the
BRG1
/
BRG2
softkeys to display/remove
the Bearing Information
windows and cycle through
bearing sources:
- NAV1/NAV2
- GPS
GND
HPA
BACK
ALERTS
METERS
IN
BACK
ALERTS
OPTN1
OPTN2
OPTN3
OFF
BACK
ALERTS
360 HSI ARC HSI
• PFD
Displays second-level softkeys for additional PFD configuration
DFLTS
Resets PFD to default settings, including changing units to standard
WIND
Displays softkeys to select and configure wind data
OPTN1
Displays wind data in longitudinal and lateral components
OPTN2
Displays wind data total direction and speed
OPTN3
Displays wind data total direction with head and cross-wind speed components
OFF
Removes wind information from display
BRG1
Cycles the Bearing 1 Information Window through:
NAV1: Waypoint frequency/identifier and distance information
GPS: Waypoint identifier and GPS distance information
OFF: Removes window
HSI FMT
Displays softkeys to select the HSI format
360 HSI
Displays HSI as a 360° compass rose