Garmin G900X Pilot's Manual - page 55

190-00726-00  Rev. A

Garmin G900X Pilot’s Guide

1-43

SYSTEM OVERVIEW

4) 

If a desired starting time is desired:

a) 

Use the large 

FMS

 Knob to highlight the HH:MM:SS field.

b) 

Use the 

FMS

 Knob to enter the desired time and press the 

ENT

 Key.

5) 

Turn the large

 FMS

 Knob to highlight ‘START?’ and press the 

ENT

 Key to start the timer.  The field changes to 

‘STOP?’.

6) 

To stop the timer, press the 

ENT

 Key with ‘STOP?’ highlighted.  The field changes to ‘RESET?’.

7) 

To reset the timer, press the 

ENT

 Key with ‘RESET?’ highlighted.  The field changes back to ‘START?’ and the 

digits are reset.

The flight timer can be set to count up from zero starting at system power-up or from the time that the 

aircraft lifts off; the timer can also be reset to zero at any time.

Setting the flight timer starting criterion:

1) 

Use the 

FMS

 Knob to select the AUX - Utility Page.

2) 

Press the 

FMS

 Knob momentarily to activate the flashing cursor.

3) 

Turn the large 

FMS

 Knob to 

highlight the field next to the flight timer.

4) 

Turn the small

 FMS

 Knob to select the starting criterion (PWR-ON or IN-AIR) and 

pr

ess the 

ENT

 Key.

Resetting the flight timer:

1) 

Use the 

FMS

 Knob to select the AUX - Utility Page.

2) 

Press the 

MENU

 Key.

3) 

With 

‘Reset Flight Timer’ highlighted, press the 

ENT

 Key.

The G900X records the time at which departure occurs, measured from system power-up or aircraft lift off.  

The displayed departure time can also be reset to display the current time at the point of reset.  The format in 

which the time is displayed is controlled from the System Setup Page.

Setting the departure timer starting criterion:

1) 

Use the 

FMS

 Knob to select the AUX - Utility Page.

2) 

Press the 

FMS

 Knob momentarily to activate the flashing cursor.

3) 

Turn the large 

FMS

 Knob to 

highlight the field next to the departure time.

4) 

Turn the small

 FMS

 Knob to select the starting criterion (PWR-ON or IN-AIR) and 

pr

ess the 

ENT

 Key.

Resetting the departure time:

1) 

Use the 

FMS

 Knob to select the AUX - Utility Page.

2) 

Press the 

MENU

 Key.

3) 

Use the 

FMS

 Knob to highlight 

‘Reset Departure Time’ and press the 

ENT

 Key.