Garmin G900X Pilot's Manual - page 210

GPS NAVIGATION

190-00726-00  Rev. A

5-52

Garmin G900X Pilot’s Guide

Loading a frequency in the standby COM or NAV window:

1) 

With the Airport Information Page displayed, press the 

FMS 

Kno

b

 to activate the cursor.

2) 

Move the cursor to the Frequencies Box.

3) 

Turn the 

FMS

 Knob to scroll through the list, placing the cursor on the desired frequency.  If a listed frequency 

has additional information for the pilot to view, the frequency is preceded by an info (‘i’) designation.  Press the 

ENT

 Key to view the information.  The following may be displayed with the frequency:

• 

‘TX’ – transmit only

• 

‘RX’ – receive only

• 

‘PT’ – part time frequency

• 

‘i’ – additional information exists, press the 

ENT

 Key

4) 

Press the 

ENT

 Key to place the selected frequency in the standby field of the COM or NAV window.

5) 

Press the 

FMS 

Knob to remove the cursor.

The Airport Frequencies field uses the descriptions and abbreviations listed in Table 5-2:

Communication 

Frequencies Which 

May Include Additional 

Information

Communication Frequencies 

Without Additional 

Information

Navigation 

Frequencies

Approach

Arrival

Class B

Class C

CTA

Departure

TMA

Terminal

TRSA

ATIS

ASOS

AWOS

Center

Clearance

Gate

Control

Ground

Helicopter

Multicom

Pre-Taxi

Radar

Ramp

Other

Tower

Unicom

ILS

LOC

Table 5-2   Frequency Descriptions and Abbreviations