Garmin G900X Pilot's Manual - page 191

GPS NAVIGATION

190-00726-00 Rev. A

5-33

Garmin G900X Pilot’s Guide

Changing a field in the GPS Navigation Status Box:

1) 

Select the System Setup Page.

2) 

Press the 

FMS

 Knob momentarily to activate the flashing cursor. 

2) 

Turn the large 

FMS

 Knob to highlight the desired field number in the MFD Data Bar Fields Box.

3) 

Turn the small 

FMS

 Knob to display and scroll through the data options list.

4) 

Select the desired data.

5) 

Press the 

ENT

 Key.  Selecting the Defaults (

DFLTS

) Softkey can be used to return all fields to their defualt setting 

(listed previously).

M

EASURING

 B

EARING

AND

 D

ISTANCE

The second map setup option is ‘Measure Bearing/Distance’ (Figure 5-22), which provides a quick and 

easy method for determining the bearing and distance between any two points on the Navigation Map.

Pressing the 

ENT

 Key at any location with the ‘Measure’ option enabled allows bearing and distance from 

the newly selected position to be acquired.

Data Fields; 

Distance to Map 

Pointer, Bearing to 

Map Pointer, and 

Elevation at Map 

Pointer Location

Figure 5-22  Measuring Bearing and Distance on the MFD Navigation Map

Bearing Line