Garmin G900X Pilot's Manual - page 315
GPS NAVIGATION
190-00726-00 Rev. A
5-157
Garmin G900X Pilot’s Guide
4)
Select the desired approach.
5)
Select the
LD APR
Softkey. The Approach Loading Page is displayed with the transitions field highlighted.
6)
Select the desired transition.
7)
Press the
ENT
Key. The ‘LOAD?’ field is highlighted.
8)
Press the
ENT
Key to load the approach. If navigating a flight plan previous to loading this approach, the
G900X continues navigating the flight plan until the approach is activated.
9)
Highlight the ‘ACTIVATE’ field.
10)
Press the
ENT
Key to activate the approach and begin navigating to the IAP.
11)
If the approach is not approved for GPS, a ‘NOT APPROVED FOR GPS’ message is displayed with ‘YES’ highlighted.
Press the
ENT
Key to acknowledge the message (or select ‘NO’).
12)
Press the
ENT
Key to return to the Approach Loading Page.
OR:
1)
From any page, press the
PROC
Key.
2)
Highlight ‘SELECT APPROACH’.
3)
Press the
ENT
Key. The APPROACH window is displayed on the ‘PROC – APPROACH LOADING’ Page.
4)
Select an approach.
5)
Press the
ENT
Key. The TRANSITION window is displayed.
6)
Select a transition (the ‘VECTORS’ option assumes vectors are received to the final course segment of the
approach and provides navigation guidance relative to the final approach course.)
7)
Press the
ENT
Key.