Garmin G900X Pilot's Manual - page 72
Garmin G900X Pilot’s Guide
190-00726-00 Rev. A
2-12
FLIGHT INSTRUMENTS
Navigation angles (track, heading, course, bearing) are corrected to the computed magnetic variation (‘Mag
Var’) or referenced to true north (denoted ‘T’), set on the AUX - System Setup Page. When an approach
referenced to true north has been loaded into the flight plan, the system generates a message to change the
navigation angle setting to ‘True’ at the appropriate time.
Figure 2-17 Heading and Course Indications (True)
Changing the navigation angle setting:
1)
Use the
FMS
Knob to select the AUX - System Setup Page on the MFD.
2)
Press the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight ‘Nav Angle’ in the ‘Display Units’ box (Figure 2-18).
4)
Turn the small
FMS
Knob to highlight the desired setting and press the
ENT
Key.
Figure 2-18 System Setup Page,
Navigation Angle Settings