Garmin G900X Pilot's Manual - page 243
GPS NAVIGATION
190-00726-00 Rev. A
5-85
Garmin G900X Pilot’s Guide
Adding a waypoint to a stored flight plan:
1)
From the Flight Plan Catalog Page, press the
FMS
Knob to activate the cursor.
2)
Highlight the desired flight plan.
3)
Select the
EDIT
Softkey.
4)
To add a waypoint to the flight plan, select the point in the plan where the new waypoint is to be added. If an
existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint.
5)
Enter the identifier, facility, or city of the new waypoint.
6)
Press the
ENT
Key. The new waypoint now exists in the flight plan.
OR
:
1)
From the Flight Plan Catalog Page, press the
FMS
Knob to activate the cursor.
2)
Highlight the desired flight plan.
3)
Press the
ENT
Key.
4)
To add a waypoint to the flight plan, select the point in the plan where the new waypoint is to be added. If an
existing waypoint is highlighted, the new waypoint is placed directly in front of this waypoint.
5)
Enter the identifier, facility, or city of the new waypoint.
6)
Press the
ENT
Key. The new waypoint now exists in the flight plan.
Removing individual waypoints from the flight plan, except waypoints in the final approach
segment:
1)
From the Active Flight Plan Window, select the waypoint that is to be deleted.
2)
Press the
CLR
Key. A confirmation window is displayed listing the waypoint.
3)
With ‘OK’ highlighted, press the
ENT
Key. To cancel the removal request, highlight ‘CANCEL’ and press the
ENT
Key.