Garmin G900X Pilot's Manual - page 200
GPS NAVIGATION
190-00726-00 Rev. A
5-42
Garmin G900X Pilot’s Guide
SPECIFYING A COURSE TO A WAYPOINT
When navigating a direct-to, the G900X sets a direct great circle course to the selected destination. The course
to a destination can also be manually selected using the course field (‘COURSE’) on the Direct-to Waypoint
Window.
Figure 5-34 Entering a Direct-to Course
Manually selecting a direct-to course:
1)
Press the
Direct-to
Key. The Direct-to Window is displayed with the destination field highlighted.
2)
Highlight the course field.
3)
Enter the desired course (Figure 5-34).
4)
Press the
ENT
Key twice to begin navigation using the selected destination and course.
5)
To reselect a direct course from the present position (or select a new manually defined course) press the
Direct-to
Key. Press the
ENT
Key twice.
CANCELING DIRECT-TO NAVIGATION
Once a direct-to is activated, the G900X provides navigation guidance to the selected destination until the
direct-to is either replaced with a new direct-to or flight plan, cancelled, or when the G900X is powered off.
Figure 5-35 Cancel Direct-to Option
Cancelling a direct-to:
1)
Press the
Direct-to
Key to display the Direct-to Window. Press the
MENU
Key.
2)
With ‘Cancel Direct-To NAV’ highlighted (Figure 5-35), press the
ENT
Key. If a flight plan is still active, the
G900X resumes navigating the flight plan along the closest leg.