Garmin G900X Pilot's Manual - page 206
GPS NAVIGATION
190-00726-00 Rev. A
5-48
Garmin G900X Pilot’s Guide
Figure 5-43 Entering Offset Value
Offset Value
11)
Turn the small
FMS
Knob to enter the desired target altitude offset from the selected Direct-to.
12)
Press the
ENT
Key to highlight ‘Activate?’ or turn the large
FMS
Knob to highlight the ‘COURSE’ field.
13)
Turn the small
FMS
Knob to enter the desired course to the waypoint.
14)
Press the
ENT
Key to highlight ‘ACTIVATE?’.
15)
Press the
ENT
again to activate the Direct-to.
Selecting a direct-to by city or facility name:
1)
Press the
Direct-to
Key.
2)
Highlight the city field (to the right of the identifier) or facility field (directly below the identifier) field.
3)
Enter the city (to the right of the identifier field) or the facility (directly below the identifier field).
4)
Once the desired city or facility name is displayed, press the
ENT
Key to confirm the selection.
5)
Press the
ENT
Key to activate the direct-to.
Selecting a direct-to from a list of waypoints in an active flight plan:
1)
Press the
Direct-to
Key.
2)
Highlight the FPL field.
3)
Turn the small
FMS
Knob to display a selection window showing all waypoints in the active flight plan.
4)
Scroll through the list and highlight the desired waypoint.
5)
Press the
ENT
Key twice to activate the direct-to.
Selecting a direct-to from the nearest airports list:
1)
Press the
Direct-to
Key.
2)
Highlight the NRST field.
3)
Turn the small
FMS
Knob to display a selection window showing the 25 nearest airports.
4)
Scroll through the list and highlight the desired airport.
5)
Press the
ENT
Key twice to activate the direct-to.