Garmin G900X Pilot's Manual - page 267
GPS NAVIGATION
190-00726-00 Rev. A
5-109
Garmin G900X Pilot’s Guide
Entering an along track offset distance:
1)
Select the Active Flight Plan Page.
2)
Select the desired lateral waypoint.
3)
Select the
OFST
Softkey.
4)
Enter a positive or negative offset distance in the range of +/- 1 to 99 nautical miles (Figure 5-85 ). NOTE: The
offset also cannot exceed the distance to the next or previous lateral non-ATK offset waypoint.
Figure 5-90 Along Track Offset Distance
Along Track Offset Distance
VNV PROFILE
The VNV profile can be changed by one of the following means:
• Changing the Flight Path Angle (FPA) for the descent segment
• Changing the target vertical speed for the descent segment
Changes to the VNV profile apply to the current active waypoint only. The VNV profile is not modifiable
if there is no active waypoint. An invalid entry results in the previous value being restored. The VNV
profile modification is invalid if it results in any of the following conditions:
• The maximum allowed FPA is exceeded
• The calculated target vertical speed exceeds the maximum allowed
• The TOD point is now located behind the aircraft’s present position or an s-turn would be required to
capture the modified vertical profile
• Modifying the vertical speed target for the current waypoint