Garmin G900X Pilot's Manual - page 47
190-00726-00 Rev. A
Garmin G900X Pilot’s Guide
1-35
SYSTEM OVERVIEW
PILOT PROFILES
System settings may be saved under a pilot profile. When the system is powered on, the last selected pilot
profile is shown on the MFD Power-up Splash Screen (Figure 1-5). The G900X can store up to 25 profiles;
the currently active profile, the amount of memory used, and the amount of memory available are shown at
the top of the System Setup Page in the box labeled ‘Pilot Profile’. From here, pilot profiles may be created,
selected, renamed, or deleted.
Creating a profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight ‘CREATE’ in the Pilot Profile Box.
4)
Press the
ENT
Key. A ‘Create Profile’ window is displayed.
5)
Use the
FMS
Knob to enter a profile name up to 16 characters long and press the
ENT
Key. Pilot profile names
cannot begin with a blank as the first letter.
6)
In the next field, use the small
FMS
Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
7)
Press the
ENT
Key.
8)
With ‘CREATE’ highlighted, press the
ENT
Key to create the profile
OR
:
Use the large
FMS
Knob to select ‘CREATE and ACTIVATE’ and press the
ENT
Key to activate the new profile.
9)
To cancel the process, select ‘CANCEL’ with the large FMS Knob and press the
ENT
Key.
Selecting an active profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight the active profile field in the Pilot Profile Box.
4)
Turn the small
FMS
Knob to display the pilot profile list and highlight the desired profile.
5)
Press the
ENT
Key. The G900X loads and displays the system settings for the selected profile.
Renaming a profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight ‘RENAME’ in the Pilot Profile Box.
4)
Press the
ENT
Key.
5)
In the ‘Rename Profile’ window, turn the
FMS
Knob to select the profile to rename.
6)
Press the
ENT
Key.