Garmin G900X Pilot's Manual - page 194

GPS NAVIGATION

190-00726-00  Rev. A

5-36

Garmin G900X Pilot’s Guide

• Active navigation flight plan

• Track vector

• Wind direction/speed

• Latitude/longitude lines

• NAV range ring

• Fuel range ring (reserve; the fuel reserve rings are enabled and disabled from the MFD only)

• Obstacles data

• Potential Terrain Proximity/obstacle impact data (TAWS)

The  following  Inset  Map  operations  can  be  performed  (operations  are  performed  independently  of  the 

MFD):

• Changing the zoom range

• Changing the declutter level

• Map panning

• Topo

• Traffic

• Terrain Proximity

• Stormscope

• NEXRAD

• Lightning

To change the Inset Map zoom range, turn the

Joystick

 clockwise to increase or counterclockwise to decrease 

the range.  Zoom ranges from 500 feet to 2,000 nautical miles.  To change the declutter level, select the 

INSET

Softkey.  Select the

DCLTR

 Softkey to remove background map details until the desired amount of detail is 

displayed.  The declutter level appears in the softkey (i.e., DCLTR-1).  

Panning the map:

1) 

Push the

Joystick

 to display the Map Pointer.  The map can now move beyond its current limits without adjusting 

the range.

2) 

Move the 

Joystick

 to pan the map in the general direction of the desired location.  When the pointer is placed 

on an object, the name of the object is highlighted for approximately 4 seconds (even if the name was not 

originally displayed on the map).  This feature applies to everything displayed on the map except for route 

lines.

3) 

Push the 

Joystick

 to cancel the panning function and re-center the map on the aircraft’s current position.