Garmin G900X Pilot's Manual - page 222
GPS NAVIGATION
190-00726-00 Rev. A
5-64
Garmin G900X Pilot’s Guide
‘Auto Comment’, when selected, overwrites the currently selected user waypoint comment with an
automatically generated comment. Auto comments are in the same format as comments that are generated
for user waypoints that have not specified unique user waypoint comments. The auto comment can be one
of three styles:
• REF1BRG1 / DIS1 - if the user waypoint position is defined by a reference 1 waypoint radial and distance
(this is generally the default case, but the default case could also be the blank case if there are no reference
waypoints near the user waypoints position.
• REF1BRG1 / REF2BRG2 - if the user waypoint position is defined by a reference 1 waypoint radial and a
reference 2 waypoint radial
• BLANK - if no reference waypoints are near the user waypoints position
Overwriting the currently selected user waypoint’s comment with an automatically generated
comment:
1)
Select the desired waypoint on the User Waypoint Information Page.
2)
Press the
MENU
Key. Select ‘Auto Comment’.
3)
Press the
ENT
Key.
‘Create New Waypoint’ creates a new user waypoint and ‘Delete User Waypoint’ deletes a user waypoint.
‘Rename User Waypoint’ renames a user waypoint.
Renaming a user waypoint:
1)
Select the User Waypoint Information Page.
2)
Press the
MENU
Key and select ‘Rename User Waypoint’
3)
Press the
ENT
Key.
3)
The user waypoint field is highlighted. Rename the user waypoint.
4)
Press the
ENT
Key.
5)
The message ‘Would you like to rename the user waypoint’ is displayed. Select ‘YES’ to rename the new user
waypoint.
OR
:
1)
Select the User Waypoint Information Page.
2)
Select the
RENAME
Softkey.
3)
The user waypoint field is highlighted. Rename the user waypoint.
4)
Press the
ENT
Key.
5)
The message ‘Would you like to rename the user waypoint’ is displayed. Select ‘YES’ to rename the new user
waypoint.