Garmin G900X Pilot's Manual - page 192
GPS NAVIGATION
190-00726-00 Rev. A
5-34
Garmin G900X Pilot’s Guide
Figure 5-23 Measure Bearing/Distance Option
Measuring bearing and distance between two points:
1)
Press the
MENU
Key (with the Navigation Map Page displayed).
2)
Highlight the ‘Measure Bearing/Distance’ field.
3)
Press the
ENT
Key. An on-screen reference pointer is displayed on the map display at the aircraft’s present
position.
4)
Move the
Joystick
to place the reference pointer at the desired location. The bearing and distance is displayed
at the top of the map display. Elevation at the current position is also displayed. Pressing the
ENT
Key changes
the starting point for measuring.
5)
To exit the Measure Bearing/Distance option, push the
Joystick
or select ‘Stop Measuring’ from the page
menu.
6)
Press the
ENT
Key.
D
ISPLAYING
C
HARTS
ChartView and FliteCharts resemble the paper version of Jeppesen and NACO terminal procedures charts.
The charts are displayed in full color with high-resolution. See the Additional Features section for more
information on ChartView and FliteCharts.
Figure 5-24 ‘Show Chart’ Option