Lantronix ETS Reference Manual - 7.2.3 Lpr On Aix Hosts
LPR Printing
TCP/IP Host Setup
7-6
9
If applicable, choose Shared and select the type of operating system that the printer will be working
with. (First confirm that the print queue is working.)
10
Test the printer by choosing Yes and clicking Finish.
7.2.3 LPR on AIX Hosts
LPR is available on machines running IBM’s AIX operating system versions 3.2 and higher. Print queues
on AIX hosts can be configured using either UNIX commands or the System Management Interface Tool
(SMIT) application.
7.2.3.1 Using UNIX Commands
Using LPR on AIX hosts involves a slightly different configuration procedure. The queue configuration file
is /etc/qconfig and the format of the entry is different, as shown in the example below. Note the lack of
colons (:) and the required white space.
Figure 7-5: Example AIX qconfig entry
ETS_PRT:
device = ETS_PRTd
up = TRUE
host = ETS_
xxxxxx
s_statfilter = /usr/lpd/bsdhort
l_statfilter = /usr/lpd/bsdlong
rq = ETS_
xxxxxx
_S1
ETS_PRTd:
backend = /usr/lpd/rembak