Lantronix ETS Reference Manual - page 247

Command Reference

Set/Define Service Commands

12-85

Parameters

ServiceName

Enter a service name of up to 14 alphanumeric characters.The default service 

name is based on the ETS name.

Note:

The Set/Define Service options do not necessarily apply to virtual sessions. See 

Set/Define Service Virtual on page 12-92 for more information.

See Also

Clear/Purge Service, page 12-7; Show/Monitor/List Services, page 12-111; 

Creating Services, page 4-12.

12.47.2   Set/Define Service AppleTalk

Specifies whether AppleTalk clients will be able to use the service. If enabled, the service name will be 

displayed as a selectable printer in Macintosh chooser screens.

Applies To

EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P

Restrictions

You must be the privileged user to use this command.

See Also

Clear/Purge Service, page 12-7; Show/Monitor/List Services, page 12-111; 

TCP/Telnet Service Sockets, page 4-14; Macintosh Service Configuration, 

page 10-2.

12.47.3   Set/Define Service Banner

Specifies whether the ETS will print a banner page before starting a print job. Banners should be disabled 

(the default) for all PostScript and plotter (binary) data. 

Applies To

EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P

Restrictions

You must be the privileged user to use this command.

See Also

Clear/Purge Service, page 12-7; Show/Monitor/List Services, page 12-111; 

TCP/Telnet Service Sockets, page 4-14.

SET

DEFINE

 SERVICE ServiceName APPLETALK 

ENABLED

DISABLED

SET

DEFINE

 SERVICE ServiceName BANNER 

ENABLED

DISABLED