Lantronix ETS Reference Manual - 12.29 Open
Open
Command Reference
12-18
12.29 Open
The Open command is functionally identical to the Connect Telnet command on page 12-9.
12.30 Ping
Ping sends a TCP/IP request for an echo packet to another network host and therefore provides an easy way
to test network connections. In general, any host that supports TCP/IP will respond if it is able, regardless
of login restrictions, job load, or operating system. If there is no reply from the host, there may be a network
or TCP/IP configuration problem.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Parameters
hostname
Enter either a text hostname or IP address.
Examples
Local> PING 192.0.1.23
Local> PING hydra.local.net
See Also
Installation Guide.
12.31 Purge
Purge commands permanently remove an entry (service or IP host) from the ETS’s database when the unit
is rebooted. Purge does not affect the current operating characteristics. The one exception to this rule is the
Purge SLIP command, explained next.
Because Purge is similar to Clear, Purge commands are explained together with their corresponding Clear
commands.
12.31.1 Purge SLIP
Removes a previously configured Define SLIP entry for a port. Clear SLIP is not a valid command.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
PING hostname
PURGE SLIP
ALL
PORT portnum
DEFAULT