Lantronix ETS Reference Manual - 12.7 Clear/purge Commands
Command Reference
Clear/Purge Commands
12-5
Port number
The broadcast is sent to the single specified port.
username
The broadcast is sent to any port that is logged in with the specified username.
If multiple users on different ports specify the same username, the message
will be sent to all of them.
message
One word, or several words enclosed in quotes. If quotes are used, the message
will be sent exactly as typed, otherwise it will be sent in uppercase. Message
length is limited to the length of the command line (132 characters) minus the
command keywords and spaces that are typed before the message.
Examples
Local> BROADCAST PORT 7 “Ready for lunch?”
Local> BROADCAST Fred “Meeting in 10 min”
See Also
Set/Define Port Broadcast, page 12-32; Set/Define Server Broadcast, page 12-
63.
12.7 Clear/Purge Commands
12.7.1 Clear/Purge Dialback
Clears a dialback setting for a particular username, or for all usernames.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use the All parameter.
Errors
Clear Dialback will return an error if the specified username isn’t found, or if
All is specified and no entries are configured.
Examples
Local> PURGE DIALBACK “robert”
Local> CLEAR DIALBACK ALL
See Also
Set/Define Port Dialback, page 12-36; Show/Monitor/List Dialback, page 12-
100; Dialback, page 5-11.
12.7.2 Clear/Purge Hosts
This is not a valid command. See Clear/Purge Telnet Hosts on page 12-8.
CLEAR
PURGE
DIALBACK
ALL
username