Lantronix ETS Reference Manual - 12.41   Set/define Menu

Set/Define Menu

Command Reference

12-26

Examples

Local> SET LOGGING HOST phred:

Local> SET LOG HOST CONSOLE COMMANDS ENABLED SECUR ENABLED

See Also

Show/Monitor/List Logging, page 12-101; Event Logging, page 4-18.

12.41   Set/Define Menu

Configures the menu and command strings for the menu handler. Each menu string is specified with a 

command string that is executed if the user selects that menu entry. Individual ports are placed in menu 

mode with the Define Port Menu command. 

Note:

It is recommended to alias a command to “Set Port Menu Disabled” if you want 

users to be able to leave menu mode and return to local mode. See Set/Define 

Port Menu on page 12-43 for more information.

Applies To

EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P

Restrictions

You must be the privileged user to use this command.

Parameters

ItemNum

Enter a number from 1 to 32 that corresponds to the menu entry you are 

changing.

String

A text string, up to 32 characters long, that is shown to the users in the menu 

screen.

Command

The command, up to 32 characters long, that is executed when the user selects 

this entry.

TitleString

An optional title for the entire menu, up to 48 characters long.

Examples

Local> Set MENU 5 “show net nodes” “SHOW HOSTS”

See Also

Set/Define Port Menu, page 12-43; Show/Monitor/List Menu, page 12-101; 

Clear/Purge Menu, page 12-6; Menu Mode, page 5-14.

12.42   Set Noprivileged

Removes privileges from the current session. See Set Privileged/Noprivileged on page 12-56.

SET

DEFINE

 MENU 

ItemNum  String Command

TITLE TitleString