Lantronix ETS Reference Manual - 4.8.2 Host Name Formats
Server Configuration
Event Logging
4-19
VMS
Ensure that the ets$configd process is running. Ensure that the priority level
*.notice is defined in the syslog.conf file.
UNIX
Set up the logging facility on the host. See the syslog man pages for more
information.
Novell
Using the PCONSOLE utility, add the ETS name as a printserver.
Note:
See Chapter 8 for more information on NetWare and PCONSOLE.
4.8.2 Host Name Formats
The following formats distinguish the host to which logging information is sent:
hostname::
Indicates a LAT host.
hostname:
Indicates a TCP/IP host, specified as either an IP address or text host name.
hostname\
Indicates a NetWare fileserver.
CONSOLE
Indicates events should be logged to the ETS serial console port (designated as
port 1).
4.8.3 Event Classes
The event classes that can be logged are:
Commands
All commands issued on the ETS will be reported (verbose output).
Network
All users logging in from or out to the network will be reported.
Printer
Changes in printer status lines will be reported.
Security
All logins and Set Privileged events are reported, as well as any password
failures.
System
Booting and Initialize events are reported.
Modem
All modem activity is reported, including incoming and outgoing jobs.
The following example sends login and security events to a TCP/IP host.
Figure 4-38: Set Logging Command
To clear logging, specify None in place of the host designation and event class.
Figure 4-39: None Option
To display current logging status, use the Show Logging command.
Local> SET LOGGING HOST 192.1.2.0: NETWORK ENABLED SECURITY ENABLED
Local> SET LOGGING NONE