Lantronix ETS Reference Manual - 12.54 Stty
Command Reference
Stty
12-115
See Also
Set/Define Server Software, page 12-82; Installation Guide.
12.54 Stty
The Stty command is functionally identical to the Set Ports and Show Ports commands. If used with a
parameter, it is treated as a Set Ports command. If used with no parameter, it is equivalent to Show Ports.
Examples
Local> STTY
Local> STTY SPEED 9600
See Also
Set/Define Port Commands, beginning with Define Port Access on page 12-27;
Show/Monitor/List Ports, page 12-102.
12.55 Su
The Su command is functionally identical to the Set Privileged/Noprivileged command detailed on page 12-
56. It is provided for UNIX compatibility.
12.56 Telnet
Telnet is shorthand for the Connect Telnet command, and is provided for simplicity.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Examples
Local> TELNET 192.0.1.252
Local> TELNET 192.0.1.252:2812
(connects to port 2812)
Local> TELNET dopus.csedu.uvts.edu
See Also
Clear/Purge Hosts, page 12-5; Connect, page 12-9; Set/Define Port Preferred,
page 12-46; Set/Define Telnet Hosts, page 12-99; Telnet, page 2-8; Parity,
Character Size, and Stop Bits, page 5-4; Connecting to Telnet Hosts, page 6-4.
TELNET hostname :EnvString