Lantronix ETS Reference Manual - page 128

Printing

NetWare Host Setup

8-6

5

Click Create.

6

Print a test document using the new print queue. 

8.3.3   Creating Bindery Print Queues with QINST

The QINST utility is the recommended way to configure Bindery print queues. 

Note:

If you wish to enable Bindery emulation on a Novell 4.x file server, refer to your 

NetWare documentation.

To create a bindery queue with QINST,

1

Log into the targer file server as Supervisor (NetWare 2.2/3.1x) or Admin (NetWare 4.x).

2

Copy the QINST.EXE file from the distribution CD-ROM into the Public directory on the file server. 

3

Type 

QINST

 to start the utility.

Note:

For NetWare version 4.0 and greater, the QINST program requires access to 

UNICODE tables to provide character translation. Copy QINST into the 

NetWare Public directory or ensure that the PATH variable includes the 

required UNICODE tables.

4

Create a Novell print queue named TESTQ on the ETS. The following example uses an ETS named 

ETS_xxxxxx with a service named ETS_xxxxxx_PCL.

Figure 8-11:  Creating Novell Print Queue

5

Use the nprint command to print a job to the ETS.

Figure 8-12:  NPRINT Command

F:\> \Public\QINST

Q-Install 

Logged in as ADMIN

Installing on GIZA, NetWare V3.xx

Volume number: 0

Enter the name of the print server.

: ETS_

xxxxxx

Enter the name of the queue to create.

: ETS_PRT

Adding print queue ETS_PRT on volume GIZA_SYS

Enter the service name on ETS_

xxxxxx

 which will service this queue

: ETS_

xxxxxx

_TEXT

Adding print server ETS_

xxxxxx

. Please wait...

Attaching ETS_

xxxxxx

 to ETS_PRT

Adding print server ETS_

xxxxxx

_TEXT. Please wait...

Attaching ETS_

xxxxxx

_TEXT to ETS_PRT

Print queue installed successfully. Resetting ETS_

xxxxxx

.

Resetting print server.

Install another queue [y/n]? n

F:\> 

F:\> nprint C:\AUTOEXEC.BAT /queue=ETS_PRT