Lantronix ETS Reference Manual - page 266
Show/Monitor/List Commands
Command Reference
12-104
12.52.8 Show/Monitor/List Protocols
Displays a summary screen of all supported protocols. General figures, such as packet counts and error
status, will be shown. Individual protocol options show what is happening in greater detail. Also refer to the
Netstat command, which shows currently active network socket connections.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Errors
Counters is not valid with List.
Parameters
AppleTalk
Displays counters and status messages specific to the AppleTalk protocol.
Nodes
Displays AppleTalk nodes, their hardware addresses, status, and uptime.
Zones
Displays available AppleTalk zones, including those learned via routers.
Local
Displays only those AppleTalk zones located on the ETS’s local network
segment.
Counters
Displays general Ethernet counter information and counters specific to the
LAT and Telnet protocols.
Enabled
Displays a list of the enabled protocols.
LANMan
Displays information specific to the LAN Manager protocol, including
NetBIOS and SMB statistics.
SHOW
MONITOR
LIST
PROTOCOLS
APPLETALK
NODES
ZONES LOCAL
[
]
COUNTERS
ENABLED
LANMAN
LAT
NETWARE
ACCESS
NDS
TCPIP