Lantronix ETS Reference Manual - page 234
Set/Define Server Commands
Command Reference
12-72
12.46.21 Set/Define Server Maintenance Password
Specifies the password that allows remote NCP connections to the ETS. The maintenance password is only
used by the MOP protocol itself; it is not needed for user-level logins.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
passwd
A string of up to sixteen hexadecimal digits (0-9, A-F, a-f) that defaults to all
zeros (off). Zero is also NCP’s default.
Examples
Local> DEFINE SERVER MAINTENANCE PASSWORD 89aacb
See Also
Maintenance Password, page 3-9.
12.46.22 Set/Define Server Multicast Timer
Specifies the length of time between ETS service announcement broadcasts for LAT circuits. This
parameter should not need to be changed under normal circumstances.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
timer
Enter an interval between multicast, ranging from 10 to 180 seconds. The
default is 30 seconds.
Examples
Local> SET SERVER MULTICAST TIMER 40
See Also
Show/Monitor/List Server, page 12-108; LAT, page 2-5; Server Identification,
page 4-3.
SET
DEFINE
SERVER MAINTENANCE PASSWORD
[
]
passwd
[
]
SET
DEFINE
SERVER MULTICAST TIMER
[
]
timer