Lantronix ETS Reference Manual - page 209
Command Reference
Set/Define Port Commands
12-47
ServiceName
Specify a LAT service for the Preferred connection. The Service keyword is
optional.
Destination port
Specifies a connection to a particular port on the dedicated host.
Node NodeName
Specifies a connection to a particular node on the dedicated host.
Environment EnvString
Sets up the connection environment before the session is started. The string is
constructed with a sequence of key letters, some of which are prefaced by
either “+” or “-.” The generic key letters are:
Telnet hostname
Specify a Telnet host to use for the Preferred connection. Either a text host
name or an IP address can be used. Environment strings can be added, such as
:R which configures a preferred Rlogin connection.
Examples
Local> SET PORT PREFERRED Vax5
Local> SET PORT PREFERRED TELNET 192.0.1.3:+C+D
Local> SET PORT PREFERRED TELNET TODD
See Also
Connect, page 12-9; Rlogin, page 12-20; Set/Define Port Autoconnect, page
12-29; Set/Define Port Dedicated, page 12-34; Telnet, page 12-115; Show/
Monitor/List Ports, page 12-102; Environment Strings, page 2-15; Preferred
Services and Hosts, page 5-4.
Table 12-6: Environment Strings
Letter
Action
D
Backspace Mode (+D) or Delete Mode (-D)
E
Local Echo Mode (+E) or Remote Echo Mode (-E)
I
Interactive Mode
P
Passall Mode (+P) or Passthru Mode (-P)
C
CR becomes CRLF (+C) or CR becomes LF (-C)
T
TCP Mode (raw uninterpreted data stream)
R
Rlogin protocol (sets port number to 513 if not already set)
U
UDP protocol
Q
Queued (RTEL) connection to the target
nnn
optional port number