Lantronix ETS Reference Manual - 12.7.7   Clear/purge Slip

Clear/Purge Commands

Command Reference

12-8

Examples

Local> CLEAR SERVICE LOCAL

Local> CLEAR SERVICE fileserver

See Also

Set/Define Service Commands, starting on page 12-84; Show/Monitor/List 

Services, page 12-111; Creating Services, page 4-12.

12.7.7   Clear/Purge SLIP 

Clear SLIP is not a valid command. See Purge SLIP on page 12-18.

12.7.8   Clear/Purge SNMP

Removes entries from the SNMP security table. 

Applies To

EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P

Restrictions

You must be the privileged user to use this command.

Parameters

All

Removes all table entries.

CommunityName

Enter a community name of up to 16 alphanumeric characters. The ETS 

generally allows multiple community names. 

Examples

Local> CLEAR SNMP public

See Also

Set/Define SNMP, page 12-98; Show/Monitor/List SNMP, page 12-112; 

Simple Network Management Protocol (SNMP), page 2-13.

12.7.9   Clear/Purge Telnet Hosts

Removes a TCP/IP host entry from the ETS table of known hosts. If the cleared host was seen through the 

rwho facility, it will reappear as soon as that machine broadcasts again. A host will also reappear if a user 

connects to it. 

Applies To

EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P

Restrictions

You must be the privileged user to use this command.

CLEAR

PURGE

 SNMP 

ALL

CommunityName

CLEAR

PURGE

 [TELNET] HOSTS  

LOCAL

HostName

ALL