Lantronix ETS Reference Manual - page 267
Command Reference
Show/Monitor/List Commands
12-105
LAT
Displays detailed counters and status messages specific to the LAT protocol,
including configured timers and session limits.
NetWare
Displays detailed counters and status messages specific to the NetWare
protocol, including routing and encapsulation information, and packet transfer
counters by packet type.
The Error Reasons field shows error counters in hexadecimal with the
rightmost bit being 0. For example, an Error Reason of 0040 represents 0000
0000 0100 0000 in binary, which means that bit 6 is set. The meaning of each
bit is explained in Table 12-8.
Access
Displays the current list of accessible NetWare fileservers.
Table 12-8: IPX Error Reasons
Bit
Meaning
Explanation
0
Received packet for unknown IPX protocol. Packet discarded.
1
Received packet for unknown socket.
Packet discarded.
2
Couldn’t attach to print queue on fileserver. When a printer is found that needs to be serviced, the ETS
attaches to the fileserver. If the ETS can’t attach, it can’t ser-
vice the queue.
3
Couldn’t connect to a fileserver.
If the ETS hears from a fileserver that matches its own access
list, it will try to connect to the fileserver and scan for print
queues. If the connection does not go through, there may be
security or license limit issues.
4
Couldn’t log out of the fileserver.
This bit should never be set.
5
Couldn’t get ETS name and password cre-
dentials from fileserver during login.
Login fails.
6
Fileserver did not accept the ETS’s server
name and password credentials.
If the login password is “access” (the default), the ETS
doesn’t send a password. Otherwise, the login password has to
match the print server password on the fileserver.
7
Couldn’t log into the fileserver.
Often means that the login slots are filled.
8
Check membership call failed.
While scanning for print queues, the ETS checks the member-
ships of various objects; this is not generally a problem.
9
Couldn’t map user to trustee.
This is where the ETS tries to get rights to access the print
queue; login fails.
10
Couldn’t attach to print queue on fileserver. Same as bit 2.
11
Couldn’t service the print queue or job.
There is a print job on the fileserver that the ETS can’t access.
12
Couldn’t open a file on the fileserver.
This is not a serious error.
13 +
Unused, should be 0.