Lantronix ETS Reference Manual - page 218
Set Privileged/Noprivileged
Command Reference
12-56
12.44 Set Privileged/Noprivileged
Changes the current port’s privilege status, provided the correct privileged password is entered. The factory
default privileged password is system; this password can be changed with the Set ETS Privileged
Password command. If the password is forgotten, the ETS can be reset to factory defaults.
Note:
Only one port on the ETS can be privileged at any time.
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
The user must know the privileged password. Secure users cannot become
privileged.
Parameters
Override
Forces the current port to become the privileged port; the previously privileged
port loses the privilege.
Examples
Local> SET NOPRIVILEGED
Password> system (not echoed)
Local> SET PRIVILEGED OVERRIDE
Password> system (not echoed)
See Also
Set/Define Server Privileged Password, page 12-76; Privileged Password,
page 3-8.
12.45 Set/Define Protocols Commands
12.45.1 Define Protocols AppleTalk
Enables or Disables the AppleTalk protocol on the ETS, and allows placement of the ETS into a zone other
than the default when there is more than one available AppleTalk zone.
SET
PRIVILEGED OVERRIDE
[
]
NOPRIVELEGED
SET
DEFINE
PROTOCOLS APPLETALK
ENABLED
DISABLED
DEVICETYPE name
ZONE ZoneName