Lantronix ETS Reference Manual - page 256
Set Session Commands
Command Reference
12-94
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
See Also
Chapter 6, Using the ETS.
12.48.3 Set Session Interactive
Allows the ETS to interpret server-specific keys (Forward, Backward, and Local) and messages.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
See Also
Set Session Passall, page 12-95; Set Session Passthru, page 12-95; Chapter 6,
Using the ETS.
12.48.4 Set Session Newline
Changes what is sent to the remote service when you press the newline key (usually Return). This command
has no effect when in Local mode or LAT sessions; nor does it have any effect if Passthru or Passall are in
effect. This command and the Set Session Delete command may be helpful if you are getting odd output
from a Telnet session.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Parameters
CR
Send carriage returns (ASCII 0xA) only.
LF
Send linefeeds (ASCII 0xD) only.
CRLF
Send both carriage returns and linefeeds.
Examples
SET SESSION NEWLINE CRLF
See Also
Set/Define Port Telnet Pad, page 12-53; Set Session Delete, page 12-93; Set
Session Passall, page 12-95; Set Session Passthru, page 12-95; Connecting to
Telnet Hosts, page 6-4.
SET SESSION INTERACTIVE
SET SESSION NEWLINE
CR
LF
CRLF