Lantronix ETS Reference Manual - 12.52.17 Show Version
Source
Command Reference
12-114
12.52.17 Show Version
Displays operating software version information.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
See Also
Set/Define Server Software, page 12-82; Reloading Operational Software,
page 3-7; Status Displays, page 6-9.
12.53 Source
Attempts to download a configuration file from a MOP, TFTP, or NetWare host. The file is assumed to
contain lines of ETS commands to be executed. The Source command is most useful for trying out a
configuration file before using the Set Server Startupfile command.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
hostname:filename
For TFTP downloads, enter the TFTP hostname (either a text name or an IP
address) followed by a colon and the download path and file name. The entire
string must be in quotes.
node::filename
For MOP downloads, enter a MOP node name followed by two colons and the
download path and file name.
hostname\sys:\login\filename
For NetWare downloads, enter the host, pathname, and filename in the above
format. Due to access restrictions, download files must be in the fileserver’s
login directory.
Verify
Causes each command from the downloaded file to be echoed before
execution.
Examples
Local> SOURCE ALVAX::start.com veri
Local> SOURCE “labsun:start.com”
Local> SOURCE LABFS4\SYS:\LOGIN\ETS.COM
SHOW VERSION
SOURCE
hostname:filename
node::filename
hostname\sys:login\filename
VERIFY