Lantronix ETS Reference Manual - page 223
Command Reference
Set/Define Protocols Commands
12-61
Network
Sets the internal network number for the ETS. This number becomes the ETS’s
address when routing packets between nodes speaking different NetWare
frame types. Under normal circumstances, the default internal network number
should not have to be changed.
netnum
A non-zero network number of up to eight hexadecimal digits in length.
Loadhost
Specifies the name of the fileserver to attempt to download from when the unit
is booted. This parameter is only useful if it is defined; if it is Set, it will be
cleared/reset at boot time.
fileserver
The fileserver name can be up to 8 characters long. The null string (“ “) returns
the setting to undefined.
None
Clears the previously-configured loadhost.
Poll
Sets the poll interval, in seconds, for print jobs. The default interval is 60
seconds.
num
Enter a number from 1 to 255.
Printserver
Configure the fileserver to which the ETS will be dedicated for Rprinter
operation.
pserver
The printserver name can be up to 8 characters long. The null string (“ “)
returns the setting to undefined.
None
Clears the previously configured printserver.
Reset
Instructs the Print ETS module to immediately rescan the network for new
connections. This is typically necessary when setting up queues or print servers
using PCONSOLE.
RIP/SAP
Enables or disables RIP/SAP broadcasts from this node.