Lantronix ETS Reference Manual - page 232
Set/Define Server Commands
Command Reference
12-70
See Also
Set/Define Server Console, page 12-65; Set/Define Server Subnet Mask, page
12-83; Show/Monitor/List Server, page 12-108; Show/Monitor/List Protocols,
page 12-104; TCP/IP, page 2-7; Dynamic Host Control Protocol (DHCP),
page 2-10.
12.46.17 Set/Define Server Keepalive Timer
Sets the period in seconds between “hello” messages on active, but quiet, LAT sessions.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
time
Enter a number from 10 to 180.
Examples
Local> SET SERVER KEEPALIVE TIMER 30
See Also
Show/Monitor/List Server, page 12-108; Server Identification, page 4-3.
12.46.18 Set/Define Server Loadhost
Specifies the TCP/IP host from which the ETS requests its runtime code. For LAT-loading ETSs, this
command has no function.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
Secondary
Allows you to specify a backup loadhost for use when the primary loadhost is
unavailable.
IPaddress
Specify the address in standard numeric format. Specifying “0.0.0.0” as the
address clears the previously-defined loadhost. No text host names can be
used.
Examples
Local> DEFINE SERVER LOADHOST 193.23.71.49
Local> DEFINE SERVER SECONDARY LOADHOST 192.0.1.89
SET
DEFINE
SERVER KEEPALIVE TIMER
[
]
time
SET
DEFINE
SERVER SECONDARY
[
]
LOADHOST IPaddress