Lantronix ETS Reference Manual - page 139
NetWare Host Setup
Troubleshooting
8-17
The following errors may be received from the file server.
3
Reboot the print server to force it to rescan the NDS tree. If you have changed printer and queue set-
ups, it may take a few minutes for the changes to propagate through the directory tree.
Table 8-3: NDS Errors from the File Server
Code
Failure code meaning
Remedy
0
OK.
None needed.
fffffda7
Object could not be found in
the given context.
Check the print server name, dscontext, and
dstree to make sure that the printer server is set
up correctly with PCONSOLE.
fffffda5
Requested attribute could not
be found.
Use PCONSOLE to make sure that the print
server has associated printers and that the print-
ers have associated queues.
fffffd69
DS Database locked.
An administrator is probably updating the data-
base. Wait a few minutes and issue the Set Pro-
tocol NetWare Reset command.
fffffd63
Invalid password.
Make sure the password for the print server
object under PCONSOLE is the same as the
login password for the print server. If the login
password on the print server is the default
(access) then there should be no password for
the print server object. If the login password is
something other than the default, then the pass-
word for the print server object should match.
fffffd54
Secure NCP violation.
The file server is probably requiring NCP packet
signature, which is currently not supported. Turn
down the NCP packet signature level so that it is
not required from the server.