Lantronix ETS Reference Manual - page 215
Command Reference
Set/Define Port Commands
12-53
12.43.39 Set/Define Port Telnet Pad
Determines whether the server will automatically pad carriage returns with null characters during Telnet
sessions. It is enabled by default.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports. Lists
of ports must be separated by commas. Ranges of ports must be separated by
a dash (-).
Note:
In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
See Also
Show/Monitor/List Ports, page 12-102; Other TCP/IP Parameters, page 4-5.
12.43.40 Set/Define Port Termtype
Specifies a terminal type for the port. This terminal type is reported to the destination node in Telnet and
Rlogin commands, and is a completely arbitrary string.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Parameters
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports. Lists
of ports must be separated by commas. Ranges of ports must be separated by
a dash (-).
Note:
In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
TermString
Up to 8 characters long, converted to all uppercase unless enclosed in quotes.
None
Clears the terminal type field. No type is configured by default.
Examples
Local> DEF Port 7 TERMTYPE “vt100”
SET
DEFINE
PORT
PortList
ALL
TELNET PAD
[
]
ENABLED
DISABLED
SET
DEFINE
PORT
PortList
ALL
TERMTYPE
TermString
NONE