Lantronix ETS Reference Manual - page 230
Set/Define Server Commands
Command Reference
12-68
12.46.14 Set/Define Server Inactivity Timer
Sets the period of time after which a port with Inactivity Logout enabled is considered inactive and
automatically logged out.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P, MSS
Restrictions
You must be the privileged user to use this command.
Parameters
limit
Enter the desired inactivity period in minutes. The default is 30 minutes.
Examples
Local> DEFINE SERVER INACTIVITY LIMIT 20
See Also
Set/Define Port Inactivity Logout, page 12-41; Show/Monitor/List Server,
page 12-108; Inactivity Logout, page 5-16.
12.46.15 Set/Define Server Incoming
Allows or denies incoming LAT or Telnet connections and enforces password protection, if desired. The
Show ETS command shows the status of incoming connection parameters.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
LAT
Enables incoming LAT connections only, and creates a new LAT service that
is used to log into the ETS.
Telnet
Enables incoming Telnet connections only. The status of incoming Telnet also
controls incoming Rlogin sessi
ons from remote hosts. It also removes any LAT-created or Both-created
service and the ability to log in using LAT.
SET
DEFINE
SERVER INACTIVITY TIMER
[
]
limit
SET
DEFINE
SERVER INCOMING
LAT
TELNET
BOTH
NONE
NOPASSWORD
PASSWORD