Lantronix ETS Reference Manual - page 225
Command Reference
Set/Define Server Commands
12-63
12.46.2 Set/Define Server Bootgateway
Specifies a server to send packets to when downloading code so that units can boot without needing proxy
arp on the router. This is not the loadhost—the packets will be addressed to the loadhost, but will be
physically set to the bootgateway host.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
See Also
Editing the Boot Parameters, page 3-7.
12.46.3 Set/Define Server BOOTP
Enables or disables querying for a BOOTP host at system boot time.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
See Also
Set/Define Server RARP, page 12-78; Editing the Boot Parameters, page 3-7.
12.46.4 Set/Define Server Broadcast
Enables or disables broadcasts from Local mode to the server’s serial ports.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
See Also
Broadcast, page 12-4; Set/Define Port Broadcast, page 12-32; Port Messages,
page 5-13.
SET
DEFINE
SERVER BOOTGATEWAY IPaddress
SET
DEFINE
SERVER BOOTP
ENABLED
DISABLED
SET
DEFINE
SERVER BROADCAST
ENABLED
DISABLED