Lantronix ETS Reference Manual - page 226
Set/Define Server Commands
Command Reference
12-64
12.46.5 Set/Define Server Buffering
Specifies the size of buffer (in bytes) to use for network connections. The ETS’s default setting should be
sufficient for most cases. The size can be increased for larger data transfers such as file transfers or printing.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
buffersize
Acceptable buffer sizes range from 128 bytes to 4096 bytes.
Defaults
ETS4P, ETS8P, and ETS16P: 2048
Other units: 512
Examples
Local> SET SERVER BUFFERING 1024
12.46.6 Set/Define Server Circuit Timer
Specifies the delay between LAT messages transmissions from the ETS to other nodes. This setting should
not need to be changed under normal circumstances, and should never be altered while there are active
sessions.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command.
Parameters
TimerValue
Specify a timer value from 30 to 200 milliseconds. The default is 80
milliseconds.
Examples
Local> SET SERVER CIRCUIT TIMER 55
See Also
LAT, page 2-5; Server Identification, page 4-3.
SET
DEFINE
SERVER BUFFERING buffersize
SET
DEFINE
SERVER CIRCUIT TIMER
[
]
TimerValue