Oki B412dn User Manual - page 141
Printing with Google Cloud Print
This section describes how to output to the printer with Google Cloud Print.
Note
The print quality may not be the same as when printing with the printer driver.
PDF files with transparency effects applied may not be printed correctly.
Encrypted PDF files may not be printed.
Printing Automatically
When the printer receives print data, it is automatically printed.
1.
Check that the printer is turned on.
2.
Start an application that supports Google Cloud Print from a computer or mobile device.
3.
Tap the wrench icon or the drop-down list in the application, and then select [Print] from the displayed
drop-down list.
4.
Select the registered printer on the displayed screen.
5.
Set the printing settings, and then print.
Memo
To print, use the Google account that you used to register the printer in Google Cloud Print.
To print with a different Google account, you must set the [Share] settings that are provided by the Google Cloud Print
service.
Printing Manually
Print manually if you cannot print automatically or you want to print immediately after receiving data.
1.
Check that the printer is turned on.
2.
Press or to select [Google Cloud Print], and then press (OK).
3.
Press or to select [Print Manually], and then press (OK).
4.
If the print data exists on the Google Cloud Print service, printing starts.
Memo
To print manually, set [Use of Cloud Service] to [Enable] or [Suspended].
For details on [Use of Cloud Service], refer to "
Checking or Changing the Use of Cloud Service Settings
".
Changing Printing Settings
To change printing settings, select [Paper Feed Options] on the printer selection screen that is displayed when you print from a
supported application.
You cannot change printing settings from the printer.
Cancelling Printing
To cancel during printing, cancel from the printer.
140