Oki B412dn User Manual - page 361
IEEE802.1X
Item
Factory
default
setting
Description
Web page
Configuration
Tool/Network
Setting plug-in
Network
Card Setup
(Mac OS X)
IEEE 802.1X
-
-
DISABLE
Enables/Disables IEEE 802.1X functions.
EAP Type
-
-
EAP-TLS
Selects the EAP method.
EAP User
-
-
(NULL)
Specifies the user name to be used in EAP. This setting is valid
when EAP-TLS/PEAP is selected. You can use up to 64
alphanumeric characters.
EAP Password
-
-
(NULL)
Specifies the password for the EAP User. This setting is only
valid when PEAP is selected. You can use up to 64
alphanumeric characters.
Use SSL/TLS
Certificate for EAP
authentication
-
-
DISABLE
Selects whether to use the SSL/TLS certificate for IEEE 802.1X
authentication.
If the SSL/TLS certificate is not installed, you cannot select
"ENABLE". This setting is only valid when EAP-TLS is selected.
Authenticate Server -
-
ENABLE
Selects whether to authenticate the certificate sent from the
RADIUS server by using CA certificate.
360